3/4” Automatic Watering Irrigation Timer Rain Sensor Sprinkler Controller Hose for Garden Greenhouse Plant Lawn System 6 Separate Programs by Weekdays on Sale

Description

3/4” Automatic Watering Irrigation Timer Rain Sensor Sprinkler Controller Hose for Garden Greenhouse Plant Lawn System 6 Separate Programs by Weekdays
Description :
*Sprinkler timer features easy installation, flexible programming and automatic irrigation.You can simply set the current time, start time, watering duration,watering frequency, rain delay and manual watering according to your needs on the large dial buttons.The large 3″LCD display is easy to read and makes watering setting easier. 
 
MANUAL: 
Accurate timing display in manual mode and allow instant faucet using without interrupting your set watering program. 
POWER INDICATOR: 
Intelligent power display to remind of replacing battery in time, the timer will be shut off automatically before battery dead. 
CHILD LOCK: 
Useful child lock mode prevent unintended trigger and water waste. 

Features: 
1. 6 Independent Programs: The smart watering timer has 6 independent programs, each program will not affect each other,It can be watered at any 6 times in a day, and the time for each watering is from 1 second to 99 minutes and 99 seconds. 
2. Two frequency modes: Irrigation programmers can set two different watering frequencies, one is set according to Monday to Sunday, the other is set according to hours and days, the shortest frequency is watering once an hour, the most It is watered once every 9 days. 
3. Automatic rain sense: There is a rain sensor chip on the top of the smart irrigation timer. When rain drops on the sensor chip, the irrigation control unit will automatically stop irrigation until the rain on the rain sensor chip dries up, and the irrigation timer will automatically execute the next irrigation program. 
4. Manual Irrigation and Child Lock：The manual button allows for instant and flexible watering without interrupting your set irrigation program.Child Lock can lock the timer to ensure not accidentally change programmed setting.Suitable for various irrigation systems and hose tap,apply to greenhouse,outdoor lawn,outside plant. 
5. Special attention: Lithium batteries are prohibited.Two 1.5V alkaline batteries should be used. 
6. Package Dimensions: ‎18 x 14 x 6.8 cm. 
 
INSTALL: 
1.Open the battery compartment on the back of timer and follow the “+” “-” marks to place 2 AA 1.5 V alkaline batteries. 
2.Place the black 3mm O-ring inside the connector. 
3.Screw the black adapter to the connector(Adapter is not required for 3/4″ faucet). 
4.Screw the top connector to the 1/2″ faucet as tight as you can,the 360°rotating connector make it easy to install at any corner. 
 
Warm Tips: 
1.Please make sure a rubber ring is well set before connecting the quick connector to top tap connector to prevent water leakage. 
2.When the power is low, please replace the batteries in time to avoid the interruption of the normal operation; when replacing the batteries, please make sure that the battery compartment is dry. 
3.The Product itself does not generate pressure, but the pressure of tap water is used; tap water or a pressurized water source ensures a normal effluent from the irrigation timer. 
4.Mesh filter prevents dirt particles, prolonging life of the product. 
 
Package Included: 
1 x watering timer. 
1 x rubber ring. 
1 x faucet adapter. 
1 x quick connector. 
1 x installation guide, 
(Batteries are not included).