40/50/100Pcs Tile Leveling System Floor Kit Alignment Clip Reusable Spacers Locator W/ Wrench on Sale

Description

40/50/100Pcs Tile Leveling System Floor Kit Alignment Clip Reusable Spacers Locator W/ Wrench
Description: 
40/50/100Pcs Tile Leveling System Floor Kit Alignment Clip Reusable Spacers Locator W/ Wrench. 

Specification: 
Material: High Quality PP + Stainless Steel. 
Color: Black+Orange. 
Applicable Brick Difference: >1.5mm. 
Applicable Tile Thickness: 5-16mm. 

Features: 
1. Wear-resistant, recyclable, reusable. 
2. Easy to use in DIY operation. 
3. Balance tiles in the same horizontal position. 
4. Improve tile installation speed. 
5. Reduce installer fatigue / pressure. 
6. There is virtually no crackless, flat surface. 
7. This reduces the need for sharpening and polishing. 
8. Avoid shingles from movement during solidification. 

Usage Tips: 
Lay the first tile, leaving more than 2mm. Close to tile. 
Insert T-pins next to the gap between the tiles. Then rotate 90 degrees and the T-needle is attached to the bottom of the two tiles. Adjust the cover by hand / wrench until the two tiles are on the same level. 
After leveling for about 5-6 hours, before the cement / adhesive is completely dry, rotate the lid in reverse and take off the 180 degree T needle. 

Avoid not removing the T-leveling tile system: 
1. Ceramic tile joints are 2mm or more (cross joints are recommended). 
2. When leveling, adhesive cement or tile cement around T-type leveler should be cleaned. 
3. Remove the T-type straightener about 5-6 hours after leveling before the tile or cement binder is completely dried. 

Package Included: 
40/50/100 x Tile Leveling System Floor Kit (Optional). 
1/2 x Wrench