19.5g 75mm 1S Diamond F4 AIO 5A BB2 ESC Reciver 25/200mW VTX Whoop FPV Racing Drone BNF w/ EX0802 19000KV Unibell Motor Runcam Nano 3 800TVL Camera Online now

Description

19.5g 75mm 1S Diamond F4 AIO 5A BB2 ESC Reciver 25/200mW VTX Whoop FPV Racing Drone BNF w/ EX0802 19000KV Unibell Motor Runcam Nano 3 800TVL Camera
Specification: 
Item Name: Moblite7 1S 75mm ultra light brushless whoop; 
Wheelbase: 75mm; 
Size: 97x97x25mm; 
Weight: 19.5g (without battery); 
Weight: 36g (with Original 1s 650mah Lipo battery). 

Motor – 
Model: EX 0802 19000KV ( New Unibell Version); 
Configuration: 9N12P; 
Stator Diameter: 8mm; 
Stator Length: 2mm; 
Shaft Diameter:Φ1mm; 
Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm; 
Weight(g): 1.7g; 
No.of Cells(Lipo): 1S only. 
 
Flight Controller – 
(Frsky SPI RX Version) DiamondF4 FR FC Firmware  Target: CrazybeeF4FR; 
MCU: STM32F411CEU6 (100MHZ, 512K FLASH); 
Sensor: MPU6000 Or ICM20689 or BMI270. (SPI connection); 
Original whoop size compatible; 
Power supply: 1S battery input (DC 2.9V-4.35V); 
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready; 
Built-in Betaflight OSD(SPI Control); 
Built-in 5.8G VTX; 
Built-in SPI Frsky/Flysky receiver; 
Built-in 5V 1A BEC. 

Onboard 4in1 ESC – 
MCU Upgraded to EFM8BB21; 
Power Supply: 1S LiPo/LiPo HV; 
Current: 5A continuous, peak 6A (3 seconds); 
Support BLHeliSuite programmable; 
Factory Firmware: O_H_50_REV16_8.HEX; 
Default Protocol: DSHOT600. 

Onboard Frsky SPI D8 receiver Version – 
SPI BUS Receiver Frsky D8 Compatible; 
Compatible Non EU transmitter D8 model; 
Channels: 8CH; 
Failsafe Support; 
No ground interference ( Transmitter and receiver 1 m from the  ground): 200m~300m. 

Onboard Flysky Receiver Version – 
SPI BUS Receiver; 
Protocol: AFHDS and AFHDS-2A Switchable; 
Channels: 8CH (AFHDS) or 14CH (AFHDS-2A); 
No ground interference ( Transmitter and receiver 1 m from the  ground): 100~200m; 
Failsafe Support. 

Onboard 5.8G 40CH 25-200mW VTX – 
Output Power: 25mw~200mw switchable; 
Frequency: 40CH; 
Input Voltage: 3.3V 5.5V; 
Current Consumption: 300mA (type); 
Frequency: 5.8GHz 5bands 40 channels (include Race band); 
Smartaudio Ready. 

Runcam Nano 3 FPV Camera – 
Model: RunCam Nano 3; 
Image Sensor: 1/3′ CMOS; 
Horizontal Resolution: 800TVL; 
Lens: 2.1mm(M8) FOV 160°; 
Signal System: PAL/NTSC Non Switchable; 
S/N Ratio: >50dB; 
Electronic Shutter Speed: Auto; 
Auto Gain Control (AGC): Auto; 
Min. Illumination: [email protected]; 
D-WDR: Auto; 
Day/Night: Color; 
Power:DC 3-5.5V; 
Current: 110mA@5V [email protected]; 
Housing Material: ABS; 
Net Weight: 1.2g; 
Dimensions: L14mm*W14mm*H9mm. 

Lipo Battery – 
Capacity: 650mAh; 
Voltage: 3.8V; 
Continuous Discharge Rate: 30C; 
Instantaneous Discharge Rate: 60C; 
Size: 60mmx18mmx8mm; 
Weight: 16g; 
Connector: PH2.0; 
Quantity: 2 PCS. 

Features: 
– The lightest 1s 75mm brushless whoop. 
– Powerful and efficiency. 
– The lightest 1s AIO 5IN1 F4 flight controller. 
– New Unibell EX0802 brushless motors. 
– Low profile Canopy design. 
– VTX power switchable 25mw~200mw. 

Package Included: 
1 x 75mm Whoop RC FPV Racing Drone Or 
Option1: 1 x DiamondF4 FR built-in SPI Frsky Receiver Or 
Option2: 1 x DiamondF4 FS built-in SPI Flysky Receiver; 
4 x EX0802 KV19000 Unibell Brushless Motor; 
1 x HQPROP 40MMX2 Propeller(4cw+4ccw); 
1 x Runcam Nano 3 FPV Camera; 
1 x Built-in 5.8G 40ch 25mw-200mw VTX; 
2 x 1S 650mah Lipo Battery; 
1 x Propeller Disassemble Tool; 
1 x Screwdriver; 
1 x Happymodel Carry Case.