19.5g 80mm Crazybee F4 Lite 1S DIY Toothpick FPV Racing Drone BNF w/ 0802 19000KV Motor Runcam Nano 3 FPV Camera on Sale

Description

19.5g 80mm Crazybee F4 Lite 1S DIY Toothpick FPV Racing Drone BNF w/ 0802 19000KV Motor Runcam Nano 3 FPV Camera
Features: 
– The Best worth 1S toothpick PNP Kit in the market; 
– Only 19.5gram 1s Toothpick; 
– Smooth and Powerful; 
– Runcam Nano 3 FPV Camera; 
– Comes unassemble, Just Plug to build it, do not need solder, enjoy DIY Fun! 

Specification: ( Assemble Guide ) 
Item Name: 80mm F4 1S FPV Racing Drone; 
Wheelbase: 80mm; 
Size: 69mmx69mmx29mm (without propeller); 
Weight: 19.5g (without battery). 

0802 19000KV Brushless Motor: 
Mode: 0802 19000KV; 
Configu-ration: 9N12P; 
Stator Diamter:8mm; 
Stator Length: 2mm; 
Shaft Diameter: Φ1.5mm; 
Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm; 
Weight(g): 1.8g; 
No.of Cells(Lipo): 1S only. 

HQProp 40mm 2-Blade Propeller: 
Model: Micro Whoop 40mmx2; 
Item Name: 40mm 2-Blade Propeller; 
Propeller Diameter: 40mm; 
Pitch: 1; 
Blades: 2; 
Material: Poly Carbonate; 
Hub Diameter: 5mm; 
Hub Thickness: 5mm; 
Shaft: 1.5mm; 
Color: Gray; 
Quantity: 2 CW + 2 CCW ( in same color); 
Weight: 0.24g. 

CRAZYBEE F4 Lite AIO Flight Controller: 
Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR; 
(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS; 
MCU: STM32F411CEU6 (100MHZ, 512K FLASH); 
Sensor: MPU-6000(SPI connection); 
Board size: 28.5 * 28.5MM; 
Power supply: 1S battery input (DC 2.9V-4.35V); 
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready; 
Built-in Betaflight OSD(SPI Control); 
Built-in 5.8G VTX; 
Built-in SPI Frsky/Flysky/DSMX/DSMX receiver; 
Built-in 5V 1A BEC; 
Built-in voltage detection. 

Onboard 5A 4in1 ESC: 
MCU upgraded to EFM8BB21; 
Power supply: 1S LiPo/LiPo HV; 
Current: 5A continuous peak 6A (3 seconds); 
Support BLHeliSuite programmable; 
Factory firmware: O_H_5_REV16_7.HEX; 
Default protocol: DSHOT600. 

Onboard Frsky Receiver (Optional): 
SPI BUS receiver Frsky D8 Compatible; 
Compatible Non EU transmitter D8 model; 
Channels: 8CH; 
Failsafe support; 
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m. 

Onboard Flysky Receiver (Optional): 
SPI BUS receiver; 
Protocol: AFHDS and AFHDS-2A Switchable; 
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A); 
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m; 
Failsafe support. 

Onboard 5.8G VTX: 
Output power: 25mw; 
Frequency: 40CH; 
Input voltage: 3.3V 5.5V; 
Current consumption: 300mA(type); 
Frequency: 5.8GHz 5bands 40 channels; 
With Race band; 
Smartaudio ready. 

Runcam Nano 3 FPV Camera: 
Image Sensor: 1/3″ CMOS; 
Horizontal Resolution: 800TVL; 
Lens: 2.3mm(M6.5) FOV 140°; 
Signal System: NTSC; 
S/N Ratio: >50dBElectronic Shutter Speed: Auto; 
Auto Gain Control (AGC): Auto; 
Min. Illumination: [email protected]; 
D-WDR: Auto; 
Day/Night: Color; 
Power:DC 3-5.5V; 
Current: 110mA@5V [email protected]; 
Housing Material: ABS; 
Net Weight: 1.2g; 
Dimensions: L14mm*W14mm*H9mm. 

Recommend Lipo Battery ( NOT Included): 
1S 250mAh, around 3:40mins; 1S 300mAh, around 4:30mins. 
1S 450mAh, around 6:30mins; 1S 650mAh, around 9:00mins. 

Package Included: 
1x 80mm Frame; 
1x F4 AIO ESC VTX Receiver Board ( Optional Receiver Version); 
4x 0802 19000KV Motor; 
2x HQProp 40mm 2-Blade Propeller CW; 
2x HQProp 40mm 2-Blade Propeller CCW; 
1x Runcam Nano 3 FPV Camera.