Description
19.5g 75mm 1S Diamond F4 AIO 5A BB2 ESC Reciver 25/200mW VTX Whoop FPV Racing Drone BNF w/ EX0802 19000KV Unibell Motor Runcam Nano 3 800TVL Camera
Specification:Â
Item Name: Moblite7 1S 75mm ultra light brushless whoop;Â
Wheelbase:Â 75mm;Â
Size: 97x97x25mm;Â
Weight: 19.5g (without battery);Â
Weight: 36g (with Original 1s 650mah Lipo battery).Â
Motor –Â
Model:Â EX 0802 19000KV ( New Unibell Version);Â
Configuration: 9N12P;Â
Stator Diameter: 8mm;Â
Stator Length: 2mm;Â
Shaft Diameter:Φ1mm;Â
Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm;Â
Weight(g):Â 1.7g;Â
No.of Cells(Lipo): 1S only.Â
Â
Flight Controller –Â
(Frsky SPI RX Version) DiamondF4 FR FC Firmware  Target: CrazybeeF4FR;Â
MCU: STM32F411CEU6 (100MHZ, 512K FLASH);Â
Sensor: MPU6000 Or ICM20689 or BMI270. (SPI connection);Â
Original whoop size compatible;Â
Power supply:Â 1SÂ battery input (DC 2.9V-4.35V);Â
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready;Â
Built-in Betaflight OSD(SPI Control);Â
Built-in 5.8G VTX;Â
Built-in SPI Frsky/Flysky receiver;Â
Built-in 5V 1A BEC.Â
Onboard 4in1 ESC –Â
MCU Upgraded to EFM8BB21;Â
Power Supply: 1S LiPo/LiPo HV;Â
Current: 5A continuous, peak 6A (3 seconds);Â
Support BLHeliSuite programmable;Â
Factory Firmware:Â O_H_50_REV16_8.HEX;Â
Default Protocol: DSHOT600.Â
Onboard Frsky SPI D8 receiver Version –Â
SPI BUS Receiver Frsky D8 Compatible;Â
Compatible Non EU transmitter D8 model;Â
Channels: 8CH;Â
Failsafe Support;Â
No ground interference ( Transmitter and receiver 1 m from the  ground): 200m~300m.Â
Onboard Flysky Receiver Version –Â
SPI BUS Receiver;Â
Protocol: AFHDS and AFHDS-2A Switchable;Â
Channels: 8CH (AFHDS) or 14CH (AFHDS-2A);Â
No ground interference ( Transmitter and receiver 1 m from the  ground): 100~200m;Â
Failsafe Support.Â
Onboard 5.8G 40CH 25-200mW VTX –Â
Output Power: 25mw~200mw switchable;Â
Frequency: 40CH;Â
Input Voltage: 3.3V 5.5V;Â
Current Consumption: 300mA (type);Â
Frequency: 5.8GHz 5bands 40 channels (include Race band);Â
Smartaudio Ready.Â
Runcam Nano 3 FPV Camera –Â
Model: RunCam Nano 3;Â
Image Sensor: 1/3′ CMOS;Â
Horizontal Resolution: 800TVL;Â
Lens: 2.1mm(M8) FOV 160°;Â
Signal System: PAL/NTSC Non Switchable;Â
S/NÂ Ratio:Â >50dB;Â
Electronic Shutter Speed: Auto;Â
Auto Gain Control (AGC): Auto;Â
Min. Illumination: [email protected];Â
D-WDR:Â Auto;Â
Day/Night:Â Color;Â
Power:DCÂ 3-5.5V;Â
Current:Â 110mA@5VÂ [email protected];Â
Housing Material: ABS;Â
Net Weight: 1.2g;Â
Dimensions:Â L14mm*W14mm*H9mm.Â
Lipo Battery –Â
Capacity:Â 650mAh;Â
Voltage: 3.8V;Â
Continuous Discharge Rate: 30C;Â
Instantaneous Discharge Rate: 60C;Â
Size: 60mmx18mmx8mm;Â
Weight:Â 16g;Â
Connector:Â PH2.0;Â
Quantity: 2 PCS.Â
Features:Â
– The lightest 1s 75mm brushless whoop.Â
– Powerful and efficiency.Â
– The lightest 1s AIO 5IN1 F4 flight controller.Â
– New Unibell EX0802 brushless motors.Â
– Low profile Canopy design.Â
– VTX power switchable 25mw~200mw.Â
Package Included:Â
1 x 75mm Whoop RC FPV Racing Drone OrÂ
Option1: 1 x DiamondF4 FR built-in SPI Frsky Receiver OrÂ
Option2: 1 x DiamondF4 FS built-in SPI Flysky Receiver;Â
4 x EX0802 KV19000 Unibell Brushless Motor;Â
1 x HQPROP 40MMX2 Propeller(4cw+4ccw);Â
1 x Runcam Nano 3 FPV Camera;Â
1 x Built-in 5.8G 40ch 25mw-200mw VTX;Â
2 x 1S 650mah Lipo Battery;Â
1 x Propeller Disassemble Tool;Â
1 x Screwdriver;Â
1 x Happymodel Carry Case.