Description
19.5g 80mm Crazybee F4 Lite 1S DIY Toothpick FPV Racing Drone BNF w/ 0802 19000KV Motor Runcam Nano 3 FPV Camera
Features:Â
– The Best worth 1S toothpick PNP Kit in the market;Â
– Only 19.5gram 1s Toothpick;Â
– Smooth and Powerful;Â
– Runcam Nano 3 FPV Camera;Â
– Comes unassemble, Just Plug to build it, do not need solder, enjoy DIY Fun!Â
Specification: ( Assemble Guide )Â
Item Name: 80mm F4 1S FPV Racing Drone;Â
Wheelbase:Â 80mm;Â
Size: 69mmx69mmx29mm (without propeller);Â
Weight: 19.5g (without battery).Â
0802 19000KV Brushless Motor:Â
Mode:Â 0802Â 19000KV;Â
Configu-ration: 9N12P;Â
Stator Diamter:8mm;Â
Stator Length: 2mm;Â
Shaft Diameter: Φ1.5mm;Â
Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm;Â
Weight(g): 1.8g;Â
No.of Cells(Lipo): 1S only.Â
HQProp 40mm 2-Blade Propeller:Â
Model: Micro Whoop 40mmx2;Â
Item Name: 40mm 2-Blade Propeller;Â
Propeller Diameter: 40mm;Â
Pitch: 1;Â
Blades:Â 2;Â
Material: Poly Carbonate;Â
Hub Diameter: 5mm;Â
Hub Thickness: 5mm;Â
Shaft:Â 1.5mm;Â
Color:Â Gray;Â
Quantity: 2 CW + 2 CCW ( in same color);Â
Weight:Â 0.24g.Â
CRAZYBEEÂ F4Â Lite AIO Flight Controller:Â
Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR;Â
(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS;Â
MCU: STM32F411CEU6 (100MHZ, 512K FLASH);Â
Sensor:Â MPU-6000(SPIÂ connection);Â
Board size: 28.5 * 28.5MM;Â
Power supply: 1S battery input (DC 2.9V-4.35V);Â
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready;Â
Built-in Betaflight OSD(SPI Control);Â
Built-in 5.8G VTX;Â
Built-in SPI Frsky/Flysky/DSMX/DSMX receiver;Â
Built-in 5V 1A BEC;Â
Built-in voltage detection.Â
Onboard 5A 4in1 ESC:Â
MCU upgraded to EFM8BB21;Â
Power supply: 1S LiPo/LiPo HV;Â
Current: 5A continuous peak 6A (3 seconds);Â
Support BLHeliSuite programmable;Â
Factory firmware: O_H_5_REV16_7.HEX;Â
Default protocol: DSHOT600.Â
Onboard Frsky Receiver (Optional):Â
SPI BUS receiver Frsky D8 Compatible;Â
Compatible Non EU transmitter D8 model;Â
Channels:Â 8CH;Â
Failsafe support;Â
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m.Â
Onboard Flysky Receiver (Optional):Â
SPIÂ BUSÂ receiver;Â
Protocol: AFHDS and AFHDS-2A Switchable;Â
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A);Â
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m;Â
Failsafe support.Â
Onboard 5.8G VTX:Â
Output power: 25mw;Â
Frequency:Â 40CH;Â
Input voltage: 3.3V 5.5V;Â
Current consumption: 300mA(type);Â
Frequency: 5.8GHz 5bands 40 channels;Â
With Race band;Â
Smartaudio ready.Â
Runcam Nano 3 FPV Camera:Â
Image Sensor: 1/3″ CMOS;Â
Horizontal Resolution: 800TVL;Â
Lens: 2.3mm(M6.5) FOV 140°;Â
Signal System: NTSC;Â
S/N Ratio: >50dBElectronic Shutter Speed: Auto;Â
Auto Gain Control (AGC): Auto;Â
Min. Illumination: [email protected];Â
D-WDR:Â Auto;Â
Day/Night:Â Color;Â
Power:DCÂ 3-5.5V;Â
Current:Â 110mA@5VÂ [email protected];Â
Housing Material: ABS;Â
Net Weight: 1.2g;Â
Dimensions:Â L14mm*W14mm*H9mm.Â
Recommend Lipo Battery ( NOT Included):Â
1S 250mAh, around 3:40mins; 1S 300mAh, around 4:30mins.Â
1S 450mAh, around 6:30mins; 1S 650mAh, around 9:00mins.Â
Package Included:Â
1x 80mm Frame;Â
1x F4 AIO ESC VTX Receiver Board ( Optional Receiver Version);Â
4x 0802 19000KV Motor;Â
2x HQProp 40mm 2-Blade Propeller CW;Â
2x HQProp 40mm 2-Blade Propeller CCW;Â
1x Runcam Nano 3 FPV Camera.